
We have higher density to meet requirement.
مميزات العزل الحراري
- الكثافة : 30-45 كغ/م3
- مقاس اللوح : 600 X 1250 مم ، ومن الممكن تصنيع الطول حسب متطلبات العميل.
- السماكات : 25، 30، 40، 50، 60، 70، 75 و 100مم
- مسطحة او مدرجة الحواف.
- مقاومة عالية للنار.
- يحمي العازل المائي من الحرارة العالية و الظروف المتغيرة
- نظام السقف المقلوب يقلل من تكاليف صيانة السقف.
- قدرة عزل طويلة المدى
- قوة ضغط عالية
- مقاومة عالية لامتصاص الماء
- يمكن ان تكون الواح العزل الحراري هيتبان ذات الكثافات العالية خيار عزل مثالي للارضيات عالية الحمل مثل تلك الموجودة في مخازن التبريد والمستودعات وأماكن وقوف السيارات. تتوفر كثافات أعلى لتلبية الاحتياجات.
ROOF APPLICATION

1. Insulation with Top Layer Gravel protection.
- Gravel layer.
- Separation layer.
- Heatban.
- Waterproofing membrane.
- Screed to fall.
- Roof deck.

1. Insulation with Top Layer Gravel protection.
- Gravel layer.
- Separation layer.
- Heatban.
- Waterproofing membrane.
- Screed to fall.
- Roof deck.

1. Insulation with Top Layer Gravel protection.
- Gravel layer.
- Separation layer.
- Heatban.
- Waterproofing membrane.
- Screed to fall.
- Roof deck.
WALL APPLICATION
INTERNAL WALL INSULATION

EXTERNAL WALL INSULATION

CAVITY WALL INSULATION

FLOOR APPLICATION
CHARACTERISTICS OF FLOORBAN
- High compressive strength.
- Long term high insulation.
- High resistance to water absorption.
- Insulation saves energy and money.
- Density: 38-45 Kg/m3
- Board size: 1250 × 600 mm
- Thickness: 25, 30, 40, 50, 60, 70, 75, 100 mm
- Edges: Rebated edges or straight.
FLOORBAN BOARDS CAN BE USED AS A WORKING SLAB
- Flooring screed or boarding
- Separating / slip layer
- Heatban.
- Concrete floor slab
- Damp proof membrane (under slab position shown)
- Sand blinding
- Hardcore
- Wall lining & skirting
- Existing external wall
- Insulation strip at screed perimeter
- DPC
TECHNICAL DETAILS
PROPERTIES | TEST METHOD | UNIT | ROOFBAN Three main categories of Heatban THERMAL INSULATION BOARDS |
||
---|---|---|---|---|---|
Density | ASTM D1622 | kg/m³ | 30-32 | 32-35 | 38-45 |
Thermal Conductivity @ 24˚C mean temperature | ASTM C518 | W/mk Btu-in/hft²˚F |
0.03 0.21 |
0.028 0.2 |
0.026 – 0.027 0.18 – 0.19 |
Compressive Strength @ 10% Deflection | ASTM D1621 | kPa | 320 – 350 | 400 – 450 | 500 – 700 |
Water Absorption by Submersion | ASTM C272 | % by Volume | ≤1 | ≤1 | ≤1 |
Water Vapor Permeability | ASTM E96-00 | Perm-inch | 0.6 – 0.8 | 0.5 – 0.7 | 0.7 |
Dimensional Stability | ASTM D2126 | % Change | <0.2 | <0.2 | <0.2 |
Flexural Strength | ASTM C203 | kPa | 380 – 400 | 400 – 425 | 510 – 525 |
Fire Classification (Exova – Germany) | UL 732 | Building Mat Class | A class | A class | A class |
Underwriters Laboratory -UL 723 = ASTM E-84 Standard test method for surface burning characteristics of Building materials under code ASTM C 578-13 | UL-723 = ASTM E – 84 |
Fire spread + smoke developed index |
10 – 25 65 – 120 |
10 – 25 65 – 120 |
10 – 25 65 – 120 |
Heatban warranty | 10 years Limited Warranty for Heatban insulation in a protected membrane roof assembly | ||||
Available Sizes of the xps sheets | Width 600mm | Length 1250 mm & Length 2500 mm(optional) | |||
Thickness | 25mm, 30mm, 40mm, 50mm, 60mm, 70mm, 75mm, 100mm | ||||
Edge Profile | Ship Lap Edge | ||||
UV light | All polystyrene-based products slowly deteriorate if exposed to UV light (sunlight) for long periods of time. ARNON Plastic Industries recommends coveringHeatban® extruded polystyrene (XPS) rigid insulation as soon as possible followingInstallation, due to the potential for damage from ultra-violet light (UV). If Heatban® insulation is not covered immediately, it is recommended that it be covered within 60 days. When exposed for up to 60 days, gradual colour fading and/or dusting of the surface may occur. Fading or colour loss, while noticeable, will not affect the performance of Heatban® XPS insulation boards. |